Elbolets

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

Select the correct isoplane setting before inserting an Elboletâ.

To insert an Elboletâ…

1.   From the Fittings tab, select Elboletâ.

The Confirm Fitting Size dialog box appears.

2.   From the scroll lists, select new inlet and outlet sizes if required.

3.   Click OK.

4.   In the drawing, click to select the elbow center point.

5.   Click to select the pipe opposite the Elboletâ direction.

6.   Click to select the other side of the elbow. It must be different than the first direction.

The Elboletâ appears in the drawing.