Changing Drawing Settings

The Change Current Settings dialog box lets you modify the following drawing settings from one location:

•  Line Number

• Main Pipe Size

• Branch Pipe Size

• Pipe Specification

• Fitting Insertion Point

• Flange Insertion Point

• Component Scaling Factor

To change drawing settings…

1.   From the Settings tab, select Change Settings.

The Change Current Settings dialog box appears.

2.   Click the setting you want to change.

A dialog box appears listing the values or options available for the selected setting.

3.   From the list of values or options, select the required setting.

4.   Select one of the following options:

• Click OK to change the setting and return to the Change Current Settings dialog box

• Click Cancel to exit without changing the setting

5.   On the Change Current Settings dialog box, click OK to return to the drawing.

Ø      Note: You must change the Units System settings using Project Manager. Refer to the Project Manager User Guide.