Use this tool to draw a revision cloud around edited parts of a drawing.
1. From the Utilities tab, select Revision
Cloud.
2. In the drawing, click at least four points around the edited items, moving counter-clockwise.
3. Press Enter.
The Revision Clouds dialog box appears.
4. Under Arc Direction, select one of the following options:
Click OK to accept the current default direction
Click Reverse to reverse the arc direction
Ø Note: If you select points in a clockwise direction, a star-shaped polyline appears. Reverse the arcs to form a cloud by selecting Reverse from the Revision Clouds dialog box.
5. Click the OK button.
The revision cloud appears in the drawing.
Copyright © 2006 - PROCAD Software. All Rights Reserved