Piping Spec Overrides

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

To set the piping spec overrides…

1.   From the Settings tab, select Spec Override.

The Spec Overrides dialog box appears. Current settings appear above the list boxes.

2.   In this dialog box, you can set the following override options:

• Welded valves: on or off

• Small fitting: screwed or socket welded

• Flange face: raised face, flat face or ring type joint

• Small pipe start size

3.   Choose one of the following options:

• Click OK to set the overrides and return to the drawing

•  Click Cancel to exit without changing the override setting