Inserting a Diaphragm Valve

1. From the Miscellaneous Valves tab, select Diaphragm.

The Diaphragm Valve dialog box appears.

2. In this dialog box, do the following:

In this…	Do this…
Description input box	Accept the default description, or type a new description
Material input box	Type a material designation value
Catalog Number input box	Type the valve’s catalog number if applicable
Manufacturer input box	Type the name of valve’s manufacturer
Tag input box	Type the valve’s tag designation; if you do not enter a value here, another dialog box will prompt you for the information later
Schedule input box	Type the valve’s schedule information
Destination options	Set the valve’s destination information to Shop or Field

3. Click OK.

If you did not enter a value in the Tag input box, the Valve Tag-Tag Text dialog box appears. Type a tag value and click OK.

4. In the drawing, click the line where you want to insert the diaphragm valve.

The valve appears in the drawing.

AutoFLOW inserts an INFO block in the valve containing the information you supplied in Step 2.