Inserting Straight and Angle Chokes

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

To insert a straight choke…

1.   From the Miscellaneous Valves tab, select Straight Choke.

2.   In the drawing, click the line where you want to insert the choke.

The choke appears in the drawing.

To insert an angle choke…

1.   From the Miscellaneous Valves tab, select Angle Choke.

2.   In the drawing, click the line where you want to insert the inlet side of the choke.

3.   Click the line where you want to insert the outlet side.

The choke appears in the drawing.