Use this tool to draw a revision cloud around edited parts of a drawing.
From the Miscellaneous or Utilities tab, select Revision Cloud.
In the drawing, click at least four points around the edited items, moving counter-clockwise.
Press Enter.
The Revision Clouds dialog box appears.
Under Arc Direction do one of the following:
Click OK to accept the current default direction
Click Reverse to reverse the arc direction
Ø Note: If you select points in a clockwise direction, a star-shaped polyline appears. Reverse the arcs to form a cloud by selecting Reverse from the Revision Clouds dialog box.
Click the OK button.
The revision cloud appears in the drawing.
Copyright © 2005 - PROCAD Software. All Rights Reserved