AutoELECTRIC contains the following function block symbols:

To insert a pre-defined function blocks…

1. From the Function Blocks tab on the Schematic Toolbox, select the required function block tool button.

2. In the drawing, click where you want to insert the block.

3. If you are inserting High Selecting or High Limiting symbols, click to set the direction.

The block appears in the drawing.

To insert a user-defined function block…

1. From the Function Blocks tab, select User.

2. In the drawing, click where you want to insert the block.

The Function Block dialog box appears.

3. In the input box, type the logic symbol text you want to appear.

4. Click OK.

The function block appears in the drawing.