The column headings are arranged and spaced out just as they are required to appear in the output report file.

Example:

SITE-ASSEMBLY-REPORT

SITE-ASSEMBLY-REPORT-COLUMN-HEADINGS

LINEREF  DRG  ASSY  NS   BOLT     NO        ASSY

         NO   NO         DIA      OFF       ATT1

Note. The column headings look out of line in the example as the space character is narrower than an actual character.

Permissible data items are:

Unique Name	IDF Record Number
PIPELINE-REFERENCE	-6
DRG	-
REVISION	-8
BATCH	-10
AREA	-10
PROJECT-IDENTIFIER	-9
PIPING-SPEC	-11
NOMINAL-CLASS	-12
NOMINAL-RATING	-12
DATE-DMY	-14
INSULATION-SPEC	-15
TRACING-SPEC	-16
PAINTING-SPEC	-17
PIPELINE-TEMP	-19
MISC-SPEC1	-41
MISC-SPEC2	-42
MISC-SPEC3	-43
MISC-SPEC4	-44
MISC-SPEC5	-45
BOLT-SET-NO	-
N.S.	-
BOLT-UP-TYPE	-
BOLT-DIA
BOLT-QUANTITY	-
TENSION-A	-
TENSION-B	-
TORQUE-SETTING	-
ATTRIBURE0 to ATTRIBUTE99	-600 to -699
ATTRIBUTE100 to ATTRIBUTE199	-900 to -999
ASSEMBLY-ATTRIBUTE1 to ASSEMBLY-ATTRIBUTE10	-190 to -199

An example of this is shown below.

SITE-ASSEMBLY-REPORT-DATA-ITEMS

'PIPELINE-REFERENCE'  1  L

'DRG'                 10 L

'BOLT-SET-NO'         15 L

'N.S.'                21 L

'BOLT-DIA'            26 L

'BOLT-QUANTITY'       36 L

'ASSEMBLY-ATTRIBUTE1' 45 L

All the above is carried out in I-Configure, the Assembly attribute is set in the application (e.g. SPOOLGEN) by selecting each Bolt and setting the value for the Assembly attribute on that Bolt.

Note. The data items BOLT-UP-TYPE, TENSION-A, TENSION-B and TORQUE-SETTING require the Bolting Info file, see BOLTING-INFO-OUTPUT section of FDF.