|
COMPONENT-INFORMATION-FILE Section |
|
|
|
|
|
COMPONENT-INFORMATION-FILE Section |
|
|
|
|
This FDF Section provides a cross reference to entries in the Component Information File (CIF) by defining the layout and content of that file.
The section heading COMPONENT-INFORMATION-FILE is followed by the following identifiers and associated data.
ITEM-CODE-IDENTIFIER
N.S.
N.S.SEC
N.S.THIRD
N.S.THICKNESS/RATING
N.S.SEC.THICKNESS/RATING
N.S.WALL-THICKNESS
N.S.SEC.WALL-THICKNESS
DESCRIPTION
COMPONENT-WEIGHT
COMPONENT-CONTENT-WEIGHT
EQUIVILANT-INSULATION-LENGTH
N.S.CONVERSION-CODE
RADIUS-DIAMETERS
RADIUS-MM
RADIUS-INCH
DETAILED-SKETCH
INFORMATION-NOTE
COMPONENT-ATTRIBUTE1 to COMPONENT-ATTRIBUTE10 (-190 tom -199)
MATERIAL-ATTRIBUTE1 to MATERIAL-ATTRIBUTE10 (-80 to -89)
User Defined Names matching those used in the PCF file
DELIMITER-CHARACTER data - where data specifies the delimiter used in the Component Information File.
Each of the following is followed by either start-col. end-col. or position in file dependant upon whether a delimiter character is set.
|
FDF Identifier |
Used For |
|
ITEM-CODE-IDENTIFIER |
1) Design contractors Item code. 2) Fabricator's Item code. |
|
N.S. |
The main bore of a component - specified in accordance with the UNITS-BORE Identifier in the UNITS-DEFINITION section of the FDF. |
|
N.S.SEC |
The secondary bore of a component - specified in accordance with the UNITS-BORE Identifier in the UNITS-DEFINITION section of the FDF. |
|
N.S.THIRD |
A third bore of a component - specified in accordance with the UNITS-BORE Identifier in the UNITS-DEFINITION section of the FDF. |
|
N.S.THICKNESS/RATING |
Thickness/Rating for the main bore of a component. |
|
N.S.SEC.THICKNESS/RATING |
Thickness/Rating for the secondary bore of a component. |
|
N.S.OUTSIDE-DIAMETER |
The outside diameter of the main bore of the component. |
|
N.S.SEC.OUTSIDE-DIAMETER |
The outside diameter of the secondary bore of the component. |
|
N.S.WALL-THICKNESS |
The wall thickness of the main bore of the component. |
|
N.S.SEC.WALL-THICKNESS |
The wall thickness of the secondary bore of the component. |
|
DESCRIPTION |
Fabricator's Material descriptions. |
|
COMPONENT-WEIGHT |
The weight of a component - in the weight units specified in accordance with the UNITS-WEIGHT Identifier in the UNITS-DEFINITION section of the FDF. |
|
COMPONENT-CONTENT-WEIGHT |
The weight of the components water volume specified in accordance with the UNITS-WEIGHT Identifier in the UNITS-DEFINITION section of the FDF. For PIPE the weight specified here’s the weight per unit length for the length units specified in the UNITS-LENGTH Identifier in the UNITS-DEFINITION section of the FDF. |
|
EQUIVILANT-INSULATION-LENGTH |
Used to equate the component insulation weight to a length based weight. Values here are the equivalent length of insulation in accordance with the weight and length units in the UNITS-LENGTH and UNITS-WEIGHT Identifiers in the UNITS-DEFINITION section of the FDF. |
|
N.S.CONVERSION-CODE
|
This is used where the N.S. and N.S. Header output on the Weld list and Weld summary outputs is to be replaced by a user supplied code. |
|
RADIUS-DIAMETERS |
Bend radius specified as a number of diameters. |
|
RADIUS-MM |
Bend radius specified in mm. |
|
RADIUS-INCH |
Bend radius specified in mm. |
|
DETAILED-SKETCH |
Detail sketch file name. |
|
INFORMATION-NOTE |
Information note name. |
|
COMPONENT-ATTRIBUTE1 to COMPONENT-ATTRIBUTE10 |
Data for Component attributes. |
|
MATERIAL-ATTRIBUTE1 to MATERIAL-ATTRIBUTE10 |
Data for Material attributes. |
|
User defined names matching those used in the PCF file. |
Data for User defined names. |
|
Notes:
|
