Your Ad Here

Used in conjunction with AText -537 to control the number of lines used for output of tube lengths.

The form of length output on the Material list is controlled by the property LinearQuantityStyle, however, in order to save space, it is possible to have a two line format.

The OutputLinesTube is set by default to 1, which uses the existing LinearQuantityStyle property.

If AText -537 is being used, then the OutputLinesTube property should be set to 2.  

AText -537 is used to indicate the new line by using the $ and the setting for the units indication to be output, for example:

-537$m

13.5

m

-537$mm

13500

mm

-537$FT

19.5

Ft

-537$FT

13.5

Ft (instead of 13.5')

Notes:

  • AText -537 should not be used if tube quantities are requested in Ft-Ins (13'-5") units.

  • If set, this AText will take over control of the Units indication output on ALL styles of Material list, as well as allowing a new line indicator to force two line output. If it is not set, then normal defaults apply.

Return to ProCAD Index

Your Ad Here