Notes:

• All the pictures shown above use Weld prefixes, except for the default Circle where Weld prefixes cannot be used, as this is limited to numeric values, 3 characters maximum.

• The size that the Circle, Double Circle and Ellipse will be drawn at, is controlled by the property FabWeldEnclSize (default 2 characters) which defines the minimum size for the enclosure. If there are more characters than the value set, the enclosure will dynamically adjust to suit.

• When the Weld number enclosure style is not the original circular type then the Weld number character size is controlled by TextSize and not property WeldNumberSize.