Solid >> Edit >> Cut By Solid

• Solid >> Edit >> Cut By Solid command cut selected solid out by another selected solid.

Step

Execute Solid >> Edit  >> Cut By Solid command as follows:

1. Select Solid >> Edit >> Cut By Solid from the menu or click the corresponding icon on the Feature toolbar.

2. pick a solid to be cut and a solid to cut orderly. After performing this command the latter solid will be changed by the former solid automatically.

   At this time, the cutter solid is kept with original shape. 

Result  

Before cutting by solid	After cutting by solid

NOTE

• Cut by surface command is restricted within many condition; however,  Cut by Solid command frees to use relatively.

• To get two closed region is accepted. 

  Before cutting by solid	After cutting by solid