• Ref. Geometry >> Create >> Plane >> Pick Parallel Plane & Point command adds a reference plane by selecting( picking ) a reference plane and a point or a reference point.

• A new reference plane parallel to the selected reference plane and passing the selected point is created.

Step   

Execute Ref. Geometry >> Create >> Plane >> Pick Parallel Plane & Point command as follows:

1. Select Ref. Geometry >> Create >> Plane >> Pick Parallel Plane & Point from the menu or click the corresponding icon from the Reference toolbar.

2. Select a reference plane.

3. Select a point on a shell.

During picking points,  User can select point entity on RMB menu as below fig.

 

Point : Any point on polygon face

Vertex : Scanned point

Ref.Point : User made Ref.Point 

Point On Surface : any point on NURBS surface

Point On Curve : any point on NURBS Curve

• Point on Surface option cannot be applied to surfaces without mesh or if rendering never been executed once. Because picking point algorithm uses rendering information. So Point on Surface option can be applied to TRUE COLOR display mode with rendering information only.