Ref. Geometry >> Create >> Plane >
From Ref.Cone
Step
- Execute
Ref.Geometry >> Create >> Plane
> From Ref.Cone: as follow
- 1. Select Ref.Geometry >> Create >>
Plane > From Ref.Cone from the menu or
click the icon from the reference toolbar and pick Ref.Cone
- 2. Following
dialogue should be appeared as below right fig
-
-
User can adjust max/min position of slice by Max/ Min Position
slide, if user slide Max slide, blue plane of max limitations shell
move, otherwise red one shell move.
-
Option Number of Slice in Slicing Method deicide slicing
method by number of sections, otherwise user can select Width of Slice and
type slice width as a method.
-
Select Slicing Method and
Min/Max Position, and then select Preview to check
result.กก
-
- 3. Select Create
to end the Execution.
Note
- This Function makes a section of Ref.Cone into Ref.plane
- To slice Ref.Geometry, RapidForm2004 uses axis of Ref.Cone