Ref. Geometry  >> Create >> Plane

Ref. Geometry  >> Create  >> Plane >> Input 3 Points
Ref. Geometry  >> Create  >> Plane >> Input Normal & Position
Ref. Geometry  >> Create  >> Plane >> Pick Points
Ref. Geometry  >> Create  >> Plane >> Pick Vector & Point
Ref. Geometry  >> Create  >> Plane >> Pick Parallel Plane & Point
Ref. Geometry  >> Create  >> Plane >> Pick Normal Vector & Point
Ref. Geometry  >> Create  >> Plane >> Fit Region
Ref. Geometry  >> Create  >> Plane >> Tangent Plane
Ref. Geometry  >> Create  >> Plane >> Offset Plane
Ref. Geometry  >> Create  >> Plane >> Rotated Plane
Ref. Geometry  >> Create  >> Plane >> At Min. Max. Boundary with X, Y, Z Axis
Ref. Geometry  >> Create  >> Plane >> At Min. Max. Boundary with Vector
Ref. Geometry  >> Create  >> Plane >> From Surfaces
Ref. Geometry  >> Create  >> Plane >> Pick Point with Viewing Direction
Ref. Geometry  >> Create  >> Plane >> From Ref.Cylinder
Ref. Geometry  >> Create  >> Plane >> From Ref.Circle
Ref. Geometry  >> Create  >> Plane >> From Ref.Cone
Ref. Geometry  >> Create  >> Plane >> From Ref.Box
Ref. Geometry  >> Create  >> Plane >> From Ref.Torus
Ref. Geometry  >> Create  >> Plane >> From Curve
Ref. Geometry  >> Create  >> Plane >> Symmetry Plane

• Ref. Geometry >> Create >> Plane command creates reference plane.
• Plane can be created through keyboard Input, pick form workspace and form Ref.Geometry
• Ref.plane have a definite size with U,V and normal directional vector and can be modified after generation.
• Due to normal vector, Ref.Plane cab be shown in it's normal direction.