• Ref. Geometry >> Create >> Cone >> Input Axis Point, Direction, Height & Radius command creates a reference cone from the input values of start point of axis, direction vector, height and radius.

Execute Ref. Geometry >> Create >> Cone >> Input Axis Point, Direction, Height & Radius command as follows:

1. Select Ref. Geometry >> Create >> Cone >> Input Axis Point, Direction, Height & Radius from the menu or click the corresponding icon from the Reference toolbar.

2. The following dialog box appears. 

3. Input the value of the start point of axis, the direction of axis, height and radius of both bottom and top faces, and select Preview.

4. If the preview result is good, select OK.