Ref. Geometry  >> Create >> Circle > From Ref.Torus

• Ref.Geometry >> Create >> Circle > From Ref.Torus command creates a Ref.Circle section and axis of  selected Ref.Torus  

 Step   

Execute Ref.Geometry >> Create >> Circle > From Ref.Torus: as follow

1. Select Ref.Geometry >> Create >> Circle > From Ref.Torus from the menu or click the icon from the reference toolbar and pick Ref.Torus.

2. Following dialogue should be appeared as below .

                  

 If user select Direction 1 option, user can slice model by axial direction.

         

 If user select Direction 2 option, user can slice model by radial direction.

                 

User can adjust max/min position of slice by Max/ Min Position slide, if user slide Max slide, blue plane of max limitations shell move, otherwise red one shell move.

Option Number of Slice in Slicing Method deicide slicing method by number of sections, otherwise user can select Width of Slice and type slice width as a method.    

 Select Direction, Slicing Method and Position, and then Preview to check the result

กก

3. Select Create to end the Execution

กก

     

Note  

• Slicing direction1 means axial section, direction2 means radial section.