Curve >> Create >> Draw On Ref.Plane >> Interpolate

• Curve >> Create >> Draw On Ref.Plane >> Interpolate command creates connected lines of grid type on Ref.Plane.

• Curve >> Create >> Draw On Ref.Plane >> Interpolate command is useful to create freeform type curves.

Step   

Execute Curve >> Create >> Draw On Ref.Plane >> Interpolate command as follows:

1. Select Curve >> Create >> Draw On Ref.Plane >> Interpolate from the menu. View point will be aligned with normal of selected Ref.Plane.

2. On RMB menu, Select Start to draw interpolate curve. you can pick point of Ref.Plane only.



    Picked points can be moved by dragging them with the left mouse button after selecting Move Point on RMB menu.

    Pause, the default option of the popup menu, is used to temporarily stop the current command.( input ready state )



3. If point picking is finished,  On RMB menu, Select End   

Note  

• Curve >> Create >> Draw On Ref.Plane >> Interpolate can be executed when only Ref.Plane is exist.

• When Start is selected on the popup menu, Pause is automatically deselected. Thus, once a user starts drawing the curves, he / she cannot move or rotate the model. Consequently, a model should be properly positioned before this operation.

• If a user wants to cancel this operation, press ESC key or icon.