 |
|
Based on your project configuration there are four AutoReport available:
Mono objective project without stochastic input variables.
Mono objective project with stochastic input variables.
Multi objective project without stochastic input variables.
Multi objective project with stochastic input variables.
Moreover AutoReport sets page header as "modeFrontier 3 - Report" and it sets an empty footer.
This kind of AutoReport is used for mono objective projects which don't contain stochastic input variables. It generates the following information:
Title Page with the default image.
Work Flow section with: main diagram, subsystems diagrams and Work Flow summary.
DOE table. AutoReport limits the maximum amount of rows included in DOE table to 200.
RSM Functions section, it includes a subsection for each output variable with at least one RSM function. Output variable section generates a new subsection for each RSM function defined for that variable. The RSM function section includes the following predefined information: function creation log, relative residual chart and distance chart.
Scheduler section, it includes: scheduler description and scheduler configuration arguments.
Designs table section. It includes: designs table truncated after first 200 designs, history charts for each output variable, scatter charts for each pair of output variables, history charts for each objective, scatter charts for each pair of objectives and a parallel chart with all the objectives.
Designs statistics section. It includes: a Student and a frequency chart for each output variable, and a correlation chart involving all the input and output variables defined in the project, this last chart is equipped with the correlation matrix in tabular form. This section isn't generated if occurs at least one of the following conditions:
The total number of input and output variables equals 0.
The number of design in the designs table is lesser than 2.
The number of output variables is 0.
This kind of AutoReport is used for mono objective projects which contain stochastic input variables. It generates the following information:
Title Page with the default image.
Work Flow section with: main diagram, subsystems diagrams and Work Flow summary.
DOE table. AutoReport limits the maximum amount of rows included in DOE table to 200.
RSM Functions section, it includes a subsection for each output variable with at least one RSM function. Output variable section generates a new subsection for each RSM function defined for that variable. The RSM function section includes the following predefined information: function creation log, relative residual chart and distance chart.
Scheduler section, it includes: scheduler description and scheduler configuration arguments.
Designs table section. It includes: designs table truncated after first 200 designs, history charts for each output variable, scatter charts for each pair of output variables, history charts for each objective, scatter charts for each pair of objectives and a parallel chart with all the objectives.
Designs statistics section. It includes: a Student and a frequency chart for each output variable, and a correlation chart involving all the input and output variables defined in the project, this last chart is equipped with the correlation matrix in tabular form. This section will be skipped if occurs at least one of the following conditions:
The total number of input and output variables equals 0.
The number of design in the designs table is lesser than 2.
The number of output variables is 0.
Robust Designs section. It includes: robust designs table and for each output variable a multi history chart of nominale value, mean and standard deviation.
Robust Designs statistics section. It includes: a Student and a frequency chart for each output variable defined in the robust table. Note that input variables statistics parameters are considered output variables in the robust table context. Finally a correlation chart involving all the input and output variables defined in the project is included, this last chart is equipped with the correlation matrix in tabular form. This section will be skipped if occurs at least one of the following conditions:
The number of design in the robust designs table is lesser than 2.
The number of output variables is 0.
This kind of AutoReport is used for multi objective projects which don't contain stochastic input variables. It generates the following information:
Title Page with the default image.
Work Flow section with: main diagram, subsystems diagrams and Work Flow summary.
DOE table. AutoReport limits the maximum amount of rows included in DOE table to 200.
MCDM Utilities section, for each MCDM utilities defined in the project AutoReport generates a new subsection with the following predefined information: attributes table, attributes relationships table, utility chart, rank chart, imported designs table and utility creation log.
RSM Functions section, it includes a subsection for each output variable with at least one RSM function. Output variable section generates a new subsection for each RSM function defined for that variable. The RSM function section includes the following predefined information: function creation log, relative residual chart and distance chart.
Scheduler section, it includes: scheduler description and scheduler configuration arguments.
Designs table section. It includes: designs table truncated after first 200 designs, history charts for each output variable, scatter charts for each pair of output variables, history charts for each objective, scatter charts for each pair of objectives and a parallel chart with all the objectives.
Designs statistics section. It includes: a Student and a frequency chart for each output variable, and a correlation chart involving all the input and output variables defined in the project, this last chart is equipped with the correlation matrix in tabular form. This section isn't generated if occurs at least one of the following conditions:
The total number of input and output variables equals 0.
The number of design in the designs table is lesser than 2.
The number of output variables is 0.
This kind of AutoReport is used for mono objective projects which contain stochastic input variables. It generates the following information:
Title Page with the default image.
Work Flow section with: main diagram, subsystems diagrams and Work Flow summary.
MCDM Utilities section, for each MCDM utilities defined in the project AutoReport generates a new subsection with the following predefined information: attributes table, attributes relationships table, utility chart, rank chart, imported designs table and utility creation log.
DOE table. AutoReport limits the maximum amount of rows included in DOE table to 200.
RSM Functions section, it includes a subsection for each output variable with at least one RSM function. Output variable section generates a new subsection for each RSM function defined for that variable. The RSM function section includes the following predefined information: function creation log, relative residual chart and distance chart.
Scheduler section, it includes: scheduler description and scheduler configuration arguments.
Designs table section. It includes: designs table truncated after first 200 designs, history charts for each output variable, scatter charts for each pair of output variables, history charts for each objective, scatter charts for each pair of objectives and a parallel chart with all the objectives.
Designs statistics section. It includes: a Student and a frequency chart for each output variable, and a correlation chart involving all the input and output variables defined in the project, this last chart is equipped with the correlation matrix in tabular form. This section will be skipped if occurs at least one of the following conditions:
The total number of input and output variables equals 0.
The number of design in the designs table is lesser than 2.
The number of output variables is 0.
Robust Designs section. It includes: robust designs table and for each output variable a multi history chart of nominale value, mean and standard deviation.
Robust Designs statistics section. It includes: a Student and a frequency chart for each output variable defined in the robust table. Note that input variables statistics parameters are considered output variables in the robust table context. Finally a correlation chart involving all the input and output variables defined in the project is included, this last chart is equipped with the correlation matrix in tabular form. This section will be skipped if occurs at least one of the following conditions:
The number of design in the robust designs table is lesser than 2.
The number of output variables is 0.