Tool Orientation - Select how to load the tool for the operation. Choose between Turn, Back Turn, Bore and Back Bore.
Cut Direction - Sets the default cut direction for all turning roughing operations.
Spindle Direction - Specifies the spindle direction as Forward or Reverse.
CSS - Check to use constant surface speed (as the tool approaches the centreline, the spindle speed increases).
Canned Cycle - Check to use the machine tool controller's canned cycle instead of the CNC code generated by EdgeCAM for the turning cycle.
Prevent Undercuts - Check to override the tool cutter angles, to prevent the tool from entering any undercuts in the diameter or face of the component. You may prefer to do this if you want to remove the region(s) later, for example if the current tool geometry is not suitable.
Profile Extensions - Specifies Start and End extensions to the profile to provide small lead in and lead out moves.