www.kxcad.net Home > CAM Index > EdgeCAM Index >
Note that some of the options in this tab may be unavailable, depending on your licence.
Spline Output - Check to output the toolpath as a series of splines. Only available with a code generator supporting this option.
Offset - Specifies the offset of the toolpath from all surfaces.
Tolerance - Specifies the maximum deviation of the generated toolpath from the selected, mathematically correct, surface.
Feedrate - Specifies the rate of movement in the workplane.
Plunge Feed - Specifies the rate of movement in the direction of the tool axis.
Speed - Specifies the tool spindle speed.
Feature Name - Enter a name here to allow labelling of digitised information for this cycle to enable "pickup" of this information in another (similar) cycle.