www.kxcad.net Home > CAM Index > EdgeCAM Index >
Clearance - Specifies the absolute height at which the tool can move freely in the XY plane without encountering any material or fixtures.
Level - Specifies the absolute height at which the cycle is to start.
Depth - Specifies the total depth to which you wish to machine. As the Depth is incremental to the Level, this is typically a negative value. Alternatively, input a calculation for the depth.
Clip to Depth - Check this for the toolpath to be clipped at the Depth value. With this unchecked, the cycle behaves as if the surface extended into a flat region at the Depth height.