www.kxcad.net Home > CAM Index > EdgeCAM Index >
Clearance - Specifies the height at which the tool can move freely in the XY plane without encountering any material or fixtures.
Associative (Clearance) - Check this for the Clearance value to be incremental from the highest point of the solid or feature you digitise. Uncheck this for the Clearance value to be absolute. Note this is only available with Model Type (in the General tab) set to Solid.
Level - The highest point at which flat regions may be found.
Associative (Level) - Check this for the Level value to be incremental from the highest point of the solid or feature you digitise. Uncheck this for the Level value to be absolute. Note this is only available with Model Type (in the General tab) set to Solid.
Depth - The depth within which flat regions may be found.
Associative (Depth) - Check this for the Depth value to be incremental from the lowest point of the solid or feature you digitise. Uncheck this for the Depth value to be absolute. Note this is only available with Model Type (in the General tab) set to Solid.