www.kxcad.net Home > CAM Index > EdgeCAM Index >
Enable Rest Mill - Check to limit the boundaries generated to contain the toolpaths to the areas identified as uncuttable by the previous tool.
Disable Meeting Plane - Check to remove the boundaries generated around the meeting plane of the analysis model.
% Stand Off - Specifies a value between 0 and 100 to define how close the toolpath should try to get to vertical walls. 0% will ensure that the tool does not climb up walls with the side effect of possibly leaving material near the base of the wall. 100% will cut closer to the vertical walls but is prone to climbing walls. The default value is set to 50%.
Minimum Depth - Specifies the minimum depth of material to be considered uncut.
Last in Sequence - When checked the previously selected tool in the sequence will define the restmill areas.
Diameter - Specifies a diameter value for the tool that the restmill area will be based upon.
Corner Radius - Specifies a corner radius value for the tool that the restmill area will be based upon