www.kxcad.net Home > CAM Index > EdgeCAM Index >
See also: Creating Arcs
Creates different types of arcs. This command is equivalent to selecting the toolbar command Arc Dialog.
Blend And Centreline - Check to create an arc that blends the first and second entities, and has its centre on the third entity.
Blend Through A Point - Check to create an arc that blends the first and second entities, and passes through a point entity.
Blend 3 Entities - Check to create an arc that blends three entities.
Centre Point - Check to create a point at the centre of the arc.
Start Angle - Specifies the angle from the centre point of the arc to the start point of the arc.
End Angle - Specifies the angle from the centre point of the arc to the end point of the arc.
Radius - Specifies a specific radius for the arc.
Diameter - Specifies a specific diameter for the arc.
Tangent To Point - Specifies the radius of an arc tangential to another entity and passing through a specified position.
Radius And 2 Points - Specifies the radius of an arc based on two end points.
Blend Radius - Specifies the radius of an arc blending two entities.
Tangent And Centreline - Specifies the radius of an arc arc tangential to an entity and having its centre point on another entity.
Name - Specifies a name for the arc entity. Use this name later to select the entity.