Optimise Feedrates
Check this to adjust the
feedrate according to the curvature of the toolpath. This prevents excessively
rapid tool angle changes when machining tight curves, for example.
www.kxcad.net Home > CAM Index > EdgeCAM Index >
|
Feed Rate |
The tool speed for cutting and other feed rate moves. |
|
|
The tool speed for plunge cuts, where these are to be at feed rate (see 'Feed When Plunging' in the Links tab). |
|
Speed |
The rotational speed of the tool in revolutions per minute. |
|
Optimise Feedrates |
Check this to adjust the
feedrate according to the curvature of the toolpath. This prevents excessively
rapid tool angle changes when machining tight curves, for example. |
|
|
|