www.kxcad.net Home > CAM Index > EdgeCAM Index >
Decimal Places - Specifies the default number of decimal places to be used for the dimension
Upper Limit - Specifies the default upper tolerance of a dimension; for example, 0.02
Lower Limit - Specifies the default lower tolerance of a dimension
Fraction - Dimensions can be given in fractions rather than decimals. For example, enter 12 to create dimensions to the nearest 1/12th of a unit. Entering a negative number (for example -12) will display the fraction as rather than 5/12. Fractions will be simplified where possible; for example, 4/12 would be shown as 1/3.
Scale - Specifies the scale to apply to the dimension's value; for example, enter 2 to create dimensions twice the value of the model entities.
Style - Selects the style for the dimension's tolerance:
None - Disables tolerancing.
Different - For different upper and lower tolerances, displayed as 51.27+0.03-0.02.
Same - For upper and lower tolerances which are the same; for example, 51.27 +/-0.03.
Range - Shows the tolerance as a range. For example, a distance of 51.27 with an upper tolerance of 0.03 and a lower tolerance of 0.02 would be shown as 51.25-51.30.
Angle Style - Selects the units for angles from Decimal (94.56º), Degrees (94º), Minutes (94º33') and Seconds (94º33'36").