Check and edit the Machine Parameters

• From the Configure menu select Machine Parameters.

• Select the Turret 1 Tab and enter the following parameters:

  Tool Change	X487	Y0	Z778
  Tool Home	X487	Y0	Z778
  Tool Setting Position	X0	Y0	Z200

   
  (In practice, these must match the physical dimensions of the machine tool)

• Select the Spindle 2 Tab and enter the following parameters:

  Datum Location

  X0

  Y0

  Z2100

  (In practice, these must match the physical dimensions of the machine tool)

  This parameter defines the separation distance measured from the main spindle datum.

• Click OK.