Redirection must occur by using the %NOCYCLE
command. Axis output is then effected by testing the system variable CAXIS
within the FEED macro (2) and finally calling a procedure.C Axis Macro Reference
Recommended Syntax
%MACRO=152=..=Move Feed=1,2,3,5,6,7,61,62,
|
System Variables Modified |
System Variable Description |
|
FEED |
Z Axis Feedrate |
|
SPEED |
Spindle Speed |
Redirection must occur by using the %NOCYCLE
command. Axis output is then effected by testing the system variable CAXIS
within the FEED macro (2) and finally calling a procedure.