Note that this is a 4 Axis Turning Macro.Turning Macro Reference
Recommended Syntax
%MACRO=28=..=Balanced Rough Turn Cycle=4,5,7,10,30,31,44,40,
This macro accesses the synchronisation macro.
Note that this is a 4 Axis Turning Macro.
|
System Variables Modified |
System Variable Description |
|
DEPTH |
Depth of Cut |
|
ENCOMMAND |
Z Lead Value |
|
FEED |
Feedrate |
|
FIELD2 |
Link Type: 1 = Rapid move 2 = Feed move |
|
FIELD7 |
Billet Z co-ordinate (if FIELD9=1) |
|
FIELD8 |
Billet X co-ordinate (if FIELD9=1) |
|
FIELD9 |
Billet selection: 0 = Start point specified by current tool position 1 = Billet specified by digitised position 2 = Geometric or toolpath billet selected |
|
FIELD10 |
Corner Type 0 = Round corners 1 = Square corners |
|
NEXTXMOVE |
Next X Axis Motion |
|
NEXTZMOVE |
Next Z Axis Motion |
|
OFFSETX |
X Axis Offset Value |
|
OFFSETZ |
Z Axis Offset Value |
|
SPEED |
Spindle Speed |
|
SUBFUNCT |
Drive Condition |
|
XEND |
X Axis End Position |
|
XSTART |
X Axis Start Position |
|
ZEND |
Z Axis End Position |
|
ZSTART |
Z Axis Start Position |