www.kxcad.net Home > CAM Index > EdgeCAM Index >
|
Control |
Fagor |
|
|
Baud rate |
4800 |
|
|
Stop bits |
1 |
|
|
Data bits |
7 |
|
|
Parity |
Even |
|
|
Protocol |
Standard |
|
|
|
|
Different on Transmit Ö |
|
Header (A) |
% |
%<LF> |
|
Header (B) |
% |
%<LF><CR><CR> |
|
Trailer (A/B) |
% |
% |
|
Interblock (A) |
<LF> |
|
|
Interblock (B) |
<LF><CR><CR> |
|
Note: These controls can use various permutations of Header and Interblock. You can use any combination of the options A and B given here.
If there is a 25-pin plug situated near the operator panel, it may be wired as a standard 25-pin DTE plug. If so, use this wiring diagram:
There is also another 9-pin connector mounted directly on the PLC unit inside the controller cabinet. This is wired as DCE but with non-standard pin outs. Use this wiring diagram:
