Face Mill Operation

www.kxcad.net Home > CAM Index > EdgeCAM Index >

1. In the General tab set: Mill Type to Climb, Angle to 0,  %Stepover to 90, Lead Length to 0 and Stock Offset to 0.5.
   
   

2. Switch to the Tooling tab and set: Feedrate to 500, Plunge Feed to 200, Speed to 150, Diameter to 1.25 and Angle to blank.

3. Switch to the Depth tab and set: Clearance to 0.25, Level to 0.04 and Depth to -0.04.

4. Click OK to generate the toolpath.