Hole Operation Roughing and Finishing

www.kxcad.net Home > CAM Index > EdgeCAM Index >

1. On the Roughing tab set Strategy to Drill and Depth (Full Dia) to -2.

2. Press the Find button to open the ToolStore. You will enter the ToolStore on the Milling tab. Click on the Hole tab and pick the 1/4" Jobber. Click Select.

3. Enter Position 5.

4. On the Finishing tab set Strategy to Bore and Full Depth to checked.

5. Press the Find button to open the ToolStore. Pick the 3/8" Bore bar and click Select.

6. Enter Position 6.

7. Click OK to generate the countersink, drilling and boring cycles.