When linking EZ-UTLS to the Bridgeport SX15 and DX32 controls, connect the Bridgeport communications cable to the RS-232 serial port on the machine and the adapter cable connected to the RS-232 serial port (COM 1 or COM 2) on the computer.
Sending from EZ-UTLS to the CNC
At the EZ-UTLS system:
Start EZ-UTLS and select the EZ-Link utility from the To CNC menu.
At the CNC:
Select the Load Remote command on the numeric keypad.
Press the 4 RECV EZLINK key on the keyboard.
Press the F3 LOAD key. A list of files is shown. Press the + key to enter a new file namefor receiving. Be sure to type the .TXT file extension.
The file should be sent automatically to the control.
Sending from the CNC to EZ-UTLS
At the EZ-UTLS system:
Start the EZ-UTLS program and select EZ-Link from the To CNC menu.
At the CNC:
Select the 4 Load Remote command on the numeric keypad.
Press the 3 SEND EZLINK key on the keyboard.
Press the F3 LOAD key. A list of files is shown. Use the cursor keys to select the file to be sent to EZ-UTLS. Press Enter when the file name is highlighted.
The file should be sent automatically to EZ-UTLS.