SetLoadTemperature

Syntax

SapObject.SapModel.TendonObj.SetLoadTemperature

VB6 Procedure

Function SetLoadTemperature(ByVal Name As String, ByVal LoadCase As String, ByVal Val As Double, Optional ByVal PatternName As String = "", Optional ByVal Replace As Boolean = True, Optional ByVal ItemType As eItemType = Object) As Long

Parameters

Name

The name of an existing tendon object or group depending on the value of the ItemType item.

LoadCase

The name of a defined load case.

Val

This is the temperature change value. [T]

PatternName

This is blank or the name of a defined joint pattern. If it is blank, the temperature load for the tendon object is uniform along the object at the value specified by Val.

If PatternName is the name of a defined joint pattern, the temperature load for the tendon object is based on the specified temperature value multiplied by the pattern value at the joints at each end of the tendon object.

Replace

If this item is True, all previous temperature loads, if any, assigned to the specified tendon object(s), in the specified load case, are deleted before making the new assignment.

ItemType

This is one of the following items in the eItemType enumeration:

Object = 0

Group = 1

SelectedObjects = 2

If this item is Object, the assignment is made to the tendon object specified by the Name item.

If this item is Group, the assignment is made to all tendon objects in the group specified by the Name item.

If this item is SelectedObjects, assignment is made to all selected tendon objects, and the Name item is ignored.

Remarks

This function assigns temperature loads to tendon objects.

The function returns zero if the loads are successfully assigned, otherwise it returns a nonzero value.

VBA Example

Sub AssignTendonTemperatureLoad()
   'dimension variables
      Dim SapObject As Sap2000.SapObject
      Dim SapModel As cSapModel
      Dim ret As Long
      Dim Name As String

   'create Sap2000 object
      Set SapObject = New SAP2000.SapObject

   'start Sap2000 application
      SapObject.ApplicationStart

   'create SapModel object
      Set SapModel = SapObject.SapModel

   'initialize model
      ret = SapModel.InitializeNewModel

   'create model from template
      ret = SapModel.File.New2DFrame(PortalFrame, 2, 144, 2, 288)

   'add tendon object by points
      ret = SapModel.TendonObj.AddByPoint("3", "9", Name)

   'assign tendon temperature load
      ret = SapModel.TendonObj.SetLoadTemperature("ALL", "DEAD", 50, , , Group)

   'close Sap2000
      SapObject.ApplicationExit False
      Set SapModel = Nothing
      Set SapObject = Nothing
End Sub

Release Notes

Initial release in version 11.00.