SetMatTemp

Syntax

SapObject.SapModel.CableObj.SetMatTemp

VB6 Procedure

Function SetMatTemp(ByVal Name As String, ByVal Temp As Double, Optional ByVal PatternName As String = "", Optional ByVal ItemType As eItemType = Object) As Long

Parameters

Name

The name of an existing cable object or group, depending on the value of the ItemType item.

Temp

This is the material temperature value assigned to the cable object. [T]

PatternName

This is blank or the name of a defined joint pattern. If it is blank, the material temperature for the cable object is uniform along the object at the value specified by Temp.

If PatternName is the name of a defined joint pattern, the material temperature for the cable object may vary from one end to the other. The material temperature at each end of the object is equal to the specified temperature multiplied by the pattern value at the joint at the end of the cable object.

ItemType

This is one of the following items in the eItemType enumeration:

Object = 0

Group = 1

SelectedObjects = 2

If this item is Object, the assignment is made to the cable object specified by the Name item.

If this item is Group, the assignment is made to all cable objects in the group specified by the Name item.

If this item is SelectedObjects, assignment is made to all selected cable objects, and the Name item is ignored.

Remarks

This function assigns material temperatures to cable objects.

The function returns zero if the material temperatures are successfully assigned, otherwise it returns a nonzero value.

VBA Example

Sub AssignCableMatTemp()
   'dimension variables
      Dim SapObject As Sap2000.SapObject
      Dim SapModel As cSapModel
      Dim ret As Long
      Dim Name As String

   'create Sap2000 object
      Set SapObject = New SAP2000.SapObject

   'start Sap2000 application
      SapObject.ApplicationStart

   'create SapModel object
      Set SapModel = SapObject.SapModel

   'initialize model
      ret = SapModel.InitializeNewModel

   'create model from template
      ret = SapModel.File.New2DFrame(PortalFrame, 3, 124, 3, 200)

   'add cable object by points
      ret = SapModel.CableObj.AddByPoint("1", "6", Name)

   'set cable data
      ret = SapModel.CableObj.SetCableData(Name, 7, 1, 0, 0, 24)

   'assign material temperature
      ret = SapModel.CableObj.SetMatTemp("ALL", 50, , Group)

   'close Sap2000
      SapObject.ApplicationExit False
      Set SapModel = Nothing
      Set SapObject = Nothing
End Sub

Release Notes

Initial release in version 11.00.