SapObject.SapModel.Results.PanelZoneDeformation
Function PanelZoneDeformation(ByVal Name As String, ByVal ItemTypeElm As eItemTypeElm, ByRef NumberResults As Long, ByRef Elm() As String, ByRef ACase() As String, ByRef StepType() As String, ByRef StepNum() As Double, ByRef U1() As Double, ByRef U2() As Double, ByRef U3() As Double, ByRef R1() As Double, ByRef R2() As Double, ByRef R3() As Double) As Long
Name
The name of an existing link object, link element, or group of objects, depending on the value of the ItemTypeElm item.
ItemTypeElm
This is one of the following items in the eItemTypeElm enumeration:
ObjectElm = 0
Element = 1
GroupElm = 2
SelectionElm = 3
If this item is ObjectElm, the result request is for the panel zone (link) element corresponding to the panel zone assignment to the point object specified by the Name item.
If this item is Element, the result request is for the panel zone (link) element specified by the Name item.
If this item is GroupElm, the result request is for all panel zone (link) elements directly or indirectly specified in the group specified by the Name item.
If this item is SelectionElm, the result request is for panel zone (link) elements directly or indirectly selected and the Name item is ignored.
For GroupElm and SelectionElm a panel zone (link) element may be indirectly specified through point objects that have panel zone assignments.
NumberResults
The total number of results returned by the program.
Elm
This is an array that includes the panel zone (link) element name associated with each result.
ACase
This is an array that includes the name of the analysis case or response combination associated with each result.
StepType
This is an array that includes the step type, if any, for each result.
StepNum
This is an array that includes the step number, if any, for each result.
U1, U2, U3
These are one dimensional arrays that include the internal translational deformation of the panel zone (link) in the link element local axes directions. [L]
R1, R2, R3
These are one dimensional arrays that include the internal rotational deformation of the panel zone (link) about the link element local axes. [rad]
This function reports the panel zone (link) internal deformations.
The function returns zero if the deformations are successfully recovered, otherwise it returns a nonzero value.
See Analysis Results Remarks for more information.
Sub GetPanelZoneDeformation()
'dimension variables
Dim SapObject As Sap2000.SapObject
Dim SapModel As cSapModel
Dim ret As Long
Dim NumberResults As Long
Dim Elm() As String
Dim ACase() As String
Dim StepType() As String
Dim StepNum() As Double
Dim U1() As Double
Dim U2() As Double
Dim U3() As Double
Dim R1() As Double
Dim R2() As Double
Dim R3() As Double
'create Sap2000 object
Set SapObject = New SAP2000.SapObject
'start Sap2000 application
SapObject.ApplicationStart
'create SapModel object
Set SapModel = SapObject.SapModel
'initialize model
ret = SapModel.InitializeNewModel
'create model from template
ret = SapModel.File.New2DFrame(PortalFrame,
2, 144, 2, 288)
'assign panel zone to point object "3"
ret = SapModel.PointObj.SetPanelZone("3",
1, 2, 0, 0, "", 0, 0, 0)
'run analysis
ret = SapModel.File.Save("C:\SapAPI\x.sdb")
ret = SapModel.Analyze.RunAnalysis
'clear all case and combo output selections
ret = SapModel.Results.Setup.DeselectAllCasesAndCombosForOutput
'set case and combo output selections
ret = SapModel.Results.Setup.SetCaseSelectedForOutput("DEAD")
'get panel zone deformation for point object "3"
ret = SapModel.Results.PanelZoneDeformation("3",
ObjectElm, NumberResults, Elm, ACase, StepType, StepNum, U1, U2, U3, R1,
R2, R3)
'close Sap2000
SapObject.ApplicationExit False
Set SapModel = Nothing
Set SapObject = Nothing
End Sub
Initial release in version 11.00.