SapObject.Sap2000.Results.AreaStressShellLayered
Function AreaStressShellLayered(ByVal name As String, ByVal ItemTypeElm As eItemTypeElm, ByRef NumberResults As Long, ByRef Obj() As String, ByRef Elm() As String, ByRef Layer() As String, ByRef IntPtNum() As Long, ByRef IntPtLoc() As Double, ByRef PointElm() As String, ByRef ACase() As String, ByRef StepType() As String, ByRef StepNum() As Double, ByRef S11() As Double, ByRef S22() As Double, ByRef S12() As Double, ByRef SMax() As Double, ByRef SMin() As Double, ByRef SAngle() As Double, ByRef SVM() As Double, ByRef S13Avg() As Double, ByRef S23Avg() As Double, ByRef SMaxAvg() As Double, ByRef SAngleAvg() As Double) As Long
Name
The name of an existing area object, area element or group of objects, depending on the value of the ItemTypeElm item.
ItemTypeElm
This is one of the following items in the eItemTypeElm enumeration:
ObjectElm = 0
Element = 1
GroupElm = 2
SelectionElm = 3
If this item is ObjectElm, the result request is for the area elements corresponding to the area object specified by the Name item.
If this item is Element, the result request is for the area element specified by the Name item.
If this item is GroupElm, the result request is for the area elements corresponding to all area objects included in the group specified by the Name item.
If this item is SelectionElm, the result request is for area elements corresponding to all selected area objects and the Name item is ignored.
NumberResults
The total number of results returned by the program.
Obj
This is an array that includes the area object name associated with each result, if any.
Elm
This is an array that includes the area element name associated with each result.
Layer
This is an array that includes the layer name associated with each result.
IntPtNum
This is an array that includes the integration point number within the specified layer of the area element.
IntPtLoc
This is an array that includes the integration point relative location within the specified layer of the area element. The location is between -1 (bottom of layer) and +1 (top of layer), inclusive. The midheight of the layer is at a value of 0.
PointElm
This is an array that includes the name of the point element where the results are reported.
ACase
This is an array that includes the name of the analysis case or response combination associated with each result.
StepType
This is an array that includes the step type, if any, for each result.
StepNum
This is an array that includes the step number, if any, for each result.
S11, S22, S12
The area element internal S11, S22 and S12 stresses, at the specified point element location, for the specified layer and layer integration point, reported in the area element local coordinate system. [F/L2]
SMax, SMin
The area element maximum and minimum principal stresses, at the specified point element location, for the specified layer and layer integration point. [F/L2]
SAngle
The angle measured counter clockwise (when the local 3 axis is pointing toward you) from the area local 1 axis to the direction of the maximum principal stress. [deg]
SVM
The area element internal Von Mises stress at the specified point element location, for the specified layer and layer integration point. [F/L2]
S13Avg, S23Avg
The area element average S13 or S23 out-of-plane shear stress at the specified point element location, for the specified layer and layer integration point. [F/L2]
SMaxAvg
The area element maximum average out-of-plane shear stress for the specified layer and layer integration point. It is equal to the square root of the sum of the squares of S13Avg and S23Avg. [F/L2]
SAngleAvg
The angle measured counter clockwise (when the local 3 axis is pointing toward you) from the area local 1 axis to the direction of SMaxAvg. [deg]
This function reports the area stresses for the specified area elements that are assigned layered shell section properties.
The function returns zero if the stresses are successfully recovered, otherwise it returns a nonzero value.
See Analysis Results Remarks for more information.
Similar to AreaStressShell
'get area stresses for area object "1"
ret = SapModel.Results.AreaStressShellLayered("1",
Object, NumberResults, Obj, Elm, Layer, IntPtNum, IntPtLoc, PointElm,
ACase, StepType, StepNum, S11, S22, S12, SMax, SMin, SAngle, SVM, S13Avg,
S23Avg, SMaxAvg, SAngleAvg)
Initial release in version 11.00.