|
Access
the Override Axis Labels And Range form as follows:
Method 1 - This method
can be used to specify parameters for displaying a pushover curve before a static nonlinear analysis
has been run.
Click
the Define menu > Pushover Parameters
Sets command to display a submenu of commands: Force vs Displacement,
ATC 40 Capacity Spectrum, FEMA 356 Coefficient Method, FEMA 440 Equivalent Linearization,
FEMA 440 Displacement Modification.
Select one of the subcommands to display the Define
Pushover Parameters for {Parameter} form; the name of the form
depends on the command used. Click the Add New Parameters button, or highlight
a previously defined pushover parameter and click the Add Copy of
Parameters or Modify/Show Parameters
button, to display the Parameters for Base Shear vs Monitored Displ form,
the Parameters
for ATC 40 Capacity Spectrum form, the
Parameters
for FEMA 356 Coefficient Method form, the
Parameters
for FEMA 440 Equivalent Linearization form, or the Parameters
for FEMA 440 Displacement Modification form, depending on the
command selected in Step 1. Click
the Set Axis Data button to
display the Override Axis Labels And Range
form.
Method 2 - Use this
method to display a pushover curve after an analysis has been run.
Define a static,
nonlinear analysis case whose Load
Application type is Displacement
Control and whose Results Saved
type is Multiple States; run
a pushover analysis. Click the Display menu > Show Static Pushover
Curve command to display the Pushover Curve
form. Choose the Static
Nonlinear Case and Plot Type;
click the Add New Parameters,
Add Copy of Parameters, or Modify/Show Parameters button to
display the Parameters for Base Shear vs Monitored Displ form,
the Parameters
for ATC 40 Capacity Spectrum form, the
Parameters
for FEMA 356 Coefficient Method form, the
Parameters
for FEMA 440 Equivalent Linearization form, or the Parameters
for FEMA 440 Displacement Modification form, depending on the
Plot Type selected. Click
the Set Axis Data button to
display the Override Axis Labels And Range
form.
Method 3 - Use this
method to save the parameters specified for displaying a pushover curve
as a Named Set for reuse in the future.
Define a static,
nonlinear analysis case whose Load
Application type is Displacement
Control and whose Results Saved
type is Multiple States; run
a pushover analysis.
Click the Define menu > Named Sets > Pushover
Named Sets command to display the Define Pushover
Named Sets form. Click
the Add New Named Set button,
or highlight a previously defined named set and click the Add Copy of Named Set or Modify/Show Named Set button, to
display the Pushover Named Set Data form. Choose the type of
plot to be displayed using the Plot
Type drop-down list, choose the Static
Nonlinear Case, specify the Plot Parameters, and then click the
Add New Parameters, Add Copy of Parameters or Modify/Show Parameters button to
display the Parameters for Base Shear vs Monitored Displ form,
the Parameters
for ATC 40 Capacity Spectrum form, the
Parameters
for FEMA 356 Coefficient Method form, the
Parameters
for FEMA 440 Equivalent Linearization form, or the Parameters
for FEMA 440 Displacement Modification form, depending on the
Plot Type selected. Click
the Set Axis Data button to
display the Override Axis Labels And Range
form. |