Manual Modules Sketch and Toon Sketch and Toon Post Effect
Sketch and Toon Basic Main Lines Render Multi-Pass Shading Editor DisplayPosition
Defines the strength of the effect. 0% = no influence, 100% = maximum influence.
Axis represents the camera axis to use. The Min and Max values define range over which the parameter is modified. For example, if Axis is set to Z and Min and Max are set to 500 m and 1000 m respectively, the range is from 500 m to 1000 m along the camera’s Z-axis.
Not all modifiers offer different modes from which to select.
 |
| A Distance modifier set to Linear mode in the Thickness tab. The graph controls the thickness of the line in relation to its distance from the camera. |
Use this mode to define how thickness or opacity should influence a particular area. The Linear mode mixes line thickness or opacity evenly over a given area. The Invert option will reverse the direction of the mixing. If, on the other hand, you set Mode to Spline, a spline graph will appear in which you can draw a gradient that will influence thickness and opacity. The X-axis represents the area from start to end of a given line, the Y-axis represents its thickness or opacity.
Enable this option to invert the effect.
See Axis.