Manual Modules Sketch and Toon Sketch and Toon Post Effect
Sketch and Toon Basic Main Lines Render Multi-Pass Shading Editor DisplayAlong Stroke
Defines the strength of the effect. 0% = no influence, 100% = maximum influence.
The Range setting defines the range over which the color, thickness or opacity is modified.
Line
Custom
When you select the Custom range, you’ll see the Min and Max boxes appear. These define the start and end of the range as distances from the camera.
Not all modifiers offer different modes from which to select.
 |
| A Distance modifier set to Linear mode in the Thickness tab. The graph controls the thickness of the line in relation to its distance from the camera. |
Use this mode to define how thickness or opacity should influence a particular area. The Linear mode mixes line thickness or opacity evenly over a given area. The Invert option will reverse the direction of the mixing. If, on the other hand, you set Mode to Spline, a spline graph will appear in which you can draw a gradient that will influence thickness and opacity. The X-axis represents the area from start to end of a given line, the Y-axis represents its thickness or opacity.
Enable this option to invert the effect.
See Range/Manual.
Defines how often a given line should be repeated.