Sketch and Toon Post Effect: Distance

Your Ad Here

Manual Modules Sketch and Toon Sketch and Toon Post Effect

Sketch and Toon

Basic Main Lines Render Multi-Pass Shading Editor Display

Distance

Strength [0..10000%]

This is the strength of the modifier’s effect, from 0% (no effect) to 100% (full effect).

Range

The Range setting defines the range over which the color, thickness or opacity is modified.

Object

This range is from the part of the object nearest the camera to the part furthest away.

Camera

This uses the camera’s Front Blur End and Rear Blur End values (Depth tab) when you enable them. If the options are disabled then Sketch and Toon will use the Target Distance in place of Rear Blur End and the Camera in place of Front Blur End.

Custom

When you select the Custom range, you’ll see the Min and Max boxes appear. These define the start and end of the range as distances from the camera.

Mode

Tip:

Not all modifiers offer different modes from which to select.

A Distance modifier set to Linear mode in the Thickness tab. The graph controls the thickness of the line in relation to its distance from the camera.

Use this mode to define how thickness or opacity should influence a particular area. The Linear mode mixes line thickness or opacity evenly over a given area. The Invert option will reverse the direction of the mixing. If, on the other hand, you set Mode to Spline, a spline graph will appear in which you can draw a gradient that will influence thickness and opacity. The X-axis represents the area from start to end of a given line, the Y-axis represents its thickness or opacity.

Invert