Press the
button.
Only the Group List is displayed in the dialog.
In the Group Management dialog, the Group List section lists all the holes found by the Create Hole Groups analysis. This analysis divides the holes into groups according to hole type, geometry and attributes. As the holes in each specific group are identical, the drilling process is the same for each hole in the group.
The Group List section of the dialog controls the display of the other sections of the dialog. When you select a group, the other sections in the dialog display parameters specific to the selected group.
|
|
The Group List section displays: Groups: the groups of identical holes Holes: the number of holes in each group Status: drill (check) or don't drill the holes. |
The status of each row in the table is color coded.
|
|
Grey = Status unchecked - do not drill. Blue = Currently selected group. Red = One or more cutters required by the drill process does not exist. Select a cutter from the Process Management section. White = The drill process is ready to be executed. |
The following operations can be carried out in this section:
|
|
Collapse Tables: Collapse all
sections of the Hole Group Management dialog, except the Group
List section. |
|
|
Drop Preview Holes: By default,
when a group is selected in the Group List, the relevant holes in the
graphics area are highlighted by preview holes. This helps to identify
the selected holes. This button drops the previews into the holes. Pressing
this button again re-displays the preview. This action of dropping and
displaying the preview, further helps to identify the selected holes. |
|
|
Remove Group: Delete a group
of holes from the Group List. |
|
|
New Group: Create a new group
of holes. |
button to drop the preview holes.
button. The following
confirmation prompt is displayed:
button to add a new group.
