Circle - Center and Radius

Create a Circle/Arc by picking its center point and defining its radius.

Required Step 1

1. Pick the center point of the Circle/Arc:

2. Enter the radius of the Circle/Arc:

3. In the case of an Arc, define the Start Point and the Theta.

4. If necessary, flip the direction of the arc by picking the direction arrow:

There is always only one possible solution.

Optional Step 1

Pick a reference plane. (If no reference plane is picked, the Circle/Arc is located on the XY plane of the active UCS).

If this is the final result, press OK or Apply in the Feature Guide to complete the function.

When completed, the Circle will appear in the Feature Tree as follows: