|
NC Popup Menus |
Define the type of popup
menus to be displayed within the NC application:
|
Simple |
Display simpler versions of the popup menus. This is the default NC-Lite option. |
|
Standard |
Display standard popup menus. This is the default Cimatron
E option. |
|
|
Boundaries Selection Method |
Define the method of selecting
boundaries/contours.
|
Select Only |
Enables you to only pick a boundary/contour. This is the default NC-Lite option. |
|
Define & Select |
Enables you to pick and define
a boundary. In this case, a dialog is displayed enabling you
to define certain machining parameters specific to the picked boundary
or contour. This is the default Cimatron
E option. |
|
|
Surfaces Selection Method (NC-Lite) |
Define the method of selecting
surfaces.
|
Auto Part (SET=_NC-PART) |
If the NC document was created in NC-Lite, all the part surfaces are,
by default, selected to be machined. These part surfaces are added to
the Set NC Part.
If this NC document is subsequently opened in Cimatron E, this surface
selection method shows you that all the part surfaces are automatically
selected and enables you to only pick the Ignored
Surfaces (the surfaces that are not
to be machined). |
|
Standard |
Display the standard method of selecting surfaces, whereby the surfaces
that are picked are the surfaces that are to be machined. This is the
default Cimatron E option. |
|
|
Drill Selection Method |
Define the method of selecting
Drilling operations (defining the drill points and their orientation).
This option is currently disabled.
|
Simple |
Display a simple method of selecting Drilling operations. This is the
default NC-Lite option. |
|
Standard |
Display the standard method of selecting Drilling operations. This is
the default Cimatron E option. |
|
|
Grid Short Name |
Show or Hide the option for displaying short
NC parameter names.
|
Hide |
Hide the option for displaying short NC parameter names. |
|
Allow |
Show the option for displaying short NC parameter names. This is the
default option. |
|
|
Activate Created UCS |
Define whether to activate a created UCS for NC operations.
|
Yes |
Activate the created UCS. |
|
Yes & Hide Others |
Activate the created UCS and hide all other UCSs. |
|
No |
Do not activate the created UCS; use the default UCS. |
|
