Access: The
Process Manager can be shown or hidden by clicking the 
icon
on the NC Toolbar. Or you can select View / Panes / NC Process Manager from
the main menu.
The Process Manager contains a collapsible tree listing detailed information of all toolpaths and their procedures. Each of these entries can be cut (Ctrl X), copied (Ctrl-C), and pasted (Ctrl-V) all items. You can select more than one item by using the Shift or Ctrl key.
As well as displaying information, the Process Manager can also be used to easily change specific toolpath parameters.
What you can do in the Process Manager:
Note: Text items that are grayed out cannot be changed from the Process Manager.
Status: Identify status flags of toolpaths and procedures. Position the cursor on the status flags icons to display a tool tip explaining the current status flags.
Detailed TP/Procedure Name: The detailed toolpath or procedure name. Edit a procedure by double-clicking on the procedure name.
TP/Procedure Name: The short toolpath or procedure name. Edit a procedure by double-clicking on the procedure name.
Hide/Show a toolpath or procedure. Hide
= 
. Show = 
.
Consider Remaining Stock: Identify whether remaining stock information is considered before generating tool motions. This procedure parameter appears under Motion Parameters / Stock Management.
U: Define whether or not to update the remaining stock information. The check box enables you easily define whether or not the procedure updates the remaining stock. This procedure parameter appears under Motion Parameters / Stock & Holder Tracking.
Comment: Enter a comment for each toolpath and/or procedure.
C: Change colors of cutter motions.
Pen: Define the pen size of cutter motions.
Cutter: Change a procedure's cutter.
Limit by Holder: Identify whether or not the machining is limited by the tool holder. Additionally, identify whether the Minimum Clear Length is calculated. If a holder is not used with the defined cutter, N/A is displayed This procedure parameter appears under Motion Parameters / Stock & Holder Tracking.
D: Show if cutter compensation has been applied. This procedure parameter appears under Machine Parameters.
UCS: Change the UCS.
Notes:
Access the Column Visibility Popup menu by right-clicking on the columns header line of the process manager.
Access functions on the Popup menu.
The red line under the selected item can be used to locate new procedures and toolpaths. In the example shown above, if you create a procedure or paste a procedure, it will be placed after the Remachine-Pencil_16 procedure.