Stock Spiral: milling performed on only one side of the cutter when used on an open area.
|
|
Stock Spiral: milling performed on only one side of the cutter when used on an open area. |
|
|
Parallel Cut: milling in which cutter passes are parallel when viewed from the Z direction. |
|
|
Spiral Cut: milling performed in spiral motions. |
|
|
Plunge Mill:
Create plunging tool motions for the fast removal of high volumes of material.
This procedure is an economical way of deep machining cores, cavities,
high shoulder slots and straight or sloped walls. |
|
Zcut: Remove volume material from enclosed regions defined by a boundary contour and islands. The milling follows the surfaces |
||
|
|
|
Zcut Parallel: Milling in which cutter passes are parallel when viewed from the Z direction. (Milling follows surfaces rather than cutting in Z layers.) |
|
|
|
Zcut Radial: Milling performed by cutter motions that radiate from a user-defined origin. (Milling follows surfaces rather than cutting in Z layers.) |
