|
|
Plunge Mill.
Create plunging tool motions for the fast removal of high volumes of material.
This procedure is an economical way of deep machining cores, cavities,
high shoulder slots and straight or sloped walls. |
How to create this procedure: (see Creating a Procedure and Procedure Guide for general explanation.)
For Technology, choose Volume Milling as the main selection, and Legacy Procedures / Plunge Mill as the subselection.
Choose the appropriate cutter.
Define the contours, part surfaces, and check surfaces.
Define the following Motion Parameters:
Define the Machine Parameters.
When finished, you can choose from the following Procedure Options:
(The options Save & Close and Save & Calculate are also available on the Procedure Guide.)
