|
|
Along Contour: Create alternating passes, tangent to the milling surface. This allows for true Climb or Conventional milling. In addition, approach and retract motions are surface tangent arcs, providing smooth approach and retract. There are the following sub-options: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Parallel Cut: The cutter moves in parallel motions. There are the following sub-options: |
|
|
Spiral Cut: The cutter moves in spiral motions. There are the following sub-options: |
|
|
Only Vertical Area: Only vertical areas are milled, in constant Z down steps. |
|
|
Legacy Pencil: Machine one pass along all internal sharp corners in the part, as well as areas with a radius of curvature smaller than the cutter radius. The results of this procedure are clean and smooth internal corners. |
